Dial-Up Networking Setup (Windows95/98) 
The first 14 
steps are only necessary if Dial-Up Networking isn't installed on your 
computer. 
(You will need your Windows95 CD-ROM for the following 
steps) 
1. Click the 
     button on your desktop.
 button on your desktop. 
2. Click Settings and then Control 
Panel. 
3. Once you are in the Control Panel, click 
     
 
4. Click the Windows 
Setup tab at the top of the window. 
5. Next, double-click Communications and 
place a check in the Dial-Up Networking box. 
6. Click OK at the bottom of 
the Communications window and then click Apply at the bottom of the Add/Remove 
Program Properties window. 
7. The computer will copy the files that it needs 
from your hard drive, or you will be asked to insert the Windows95 CD-ROM. 
8. Once the files have been copied, you will be asked to restart the 
computer for the changes to be made, select Yes. 
     
 
9. After the computer 
restarts, double-click 
     in the Control Panel and then click ADD in the middle of the 
window.
 in the Control Panel and then click ADD in the middle of the 
window. 
10. Next, click Protocol and then click Add. 
11. Under the 
Manufacturers column, select Microsoft and under the Network Protocols column 
click TCP/IP. 
     
 
12. Click OK 
13. Click OK at the bottom of the Network window. 
14. You will now see a 
message that says you must restart your computer, click Yes here. 
15. Click 
 and then click
 and then click 
     
 
16. Click 
     
 
17. Type SSSNet where 
it says Type a name for the computer you are dialing, then click Next>. 
18. Type in your area code and the access number that is local to you. 
19. Click Next> and then Finish on the next window. 
20. Click 
     with your right mouse 
button, then click Create Shortcut.
 with your right mouse 
button, then click Create Shortcut. 
21. Click Yes when you get the message 
that Windows cannot create a shortcut here. 
22. Click 
     with your right mouse 
buttom, then click Properties.
 with your right mouse 
buttom, then click Properties. 
23. Click Server Types and remove the checks 
from Log on to network, NetBEUI, IPX/SPX Compatible 
        
     
 
24. Click OK and then OK again if 
necessary. 
25. Close The Dial-Up Networking and My Computer windows. 
    26. 
You have finished making a Dial-Up Networking connection. To connect, 
double-click 
     enter 
your Username and Password and click Connect.
        enter 
your Username and Password and click Connect.
 Super-Net Inc. Subscriber-Agreement
 print date("F jS, Y"); ?>